Adaptec PCI Ethernet and Fast Ethernet Adapters Guide de l'utilisateur télécharger pdf (Page 54)

7-2

Fast Ethernet Network Interface Cards

Configuring Ports

To change the NIC configuration settings highlight the NIC to

configure and click Edit.

Note:

There are three ways to gain information for

each parameter:

- select Range to see valid choices

- press F1 to see parameters and default settings

- select Help for additional details

Select the Tranciever type. For an explanation of possible

options see Connection Types on page A-2 or press F1.

Specify Full or Half Duplex

Specify the Index number.

Note:

Each port must be assigned a unique index

number.

Make any other necessary changes and click OK.

Repeat Steps 1 - 5 for each port.

Configuring Protocols

Under Protocols, highlight the desired network protocol(s) and

click Add.

Note:

The NetBios protocol is required for LAN Server

and OS/2 Peer connections.

If you selected IBM NetWare Requester Support from the

Protocols box, you need to make the following configuration

changes:

– In the Current Configuration box, highlight IBM NetWare

Requester and select Edit.

– Change the Token-Ring Support Option to NO.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 121 122

Pas de commentaire

Adaptec PCI Ethernet and Fast Ethernet Adapters Guide de l'utilisateur Page 54