Adaptec PCI Ethernet and Fast Ethernet Adapters Guide de l'utilisateur télécharger pdf (Page 50)

6-4

Fast Ethernet Network Interface Cards

Configuring Ports

At the system command line type

pkgadd -d /tmp/EMPCI

After uncompressing the files the following message appears:

The following packages are available:

1 EMPCI

Type 1 to select EMPCI

Note:

Only one choice (1 EMPCI) is given here

regardless of how many NICs are installed.

Now a list of Adaptec NICs is displayed. Select the NIC you

wish to configure and press Enter.

Note:

For a multiport NIC there will be multiple

device listings. Each port must be configured.

Select the connection type and press Enter. For an explanation

of possible options see Connection Types on page A-2.

If prompted, select Half Duplex or Full Duplex and press

Enter.

The system will now automatically detect the next port. Repeat

Steps 4 - 5 for each port.

Configuring Protocols

At the system command line prompt type

/etc/confnet.d/configure -i

Select the NIC to configure and press Enter.

Follow the online prompts to configure the protocols.

Repeat Step 1 - 3 for each port.

Reboot the system.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 121 122

Pas de commentaire

Adaptec PCI Ethernet and Fast Ethernet Adapters Guide de l'utilisateur Page 50