Adaptec APA-1350 Guide d'installation télécharger pdf (Page 26)

ASI Hardware Installation Guide

Installing the SlimSCSI 1460 Card into your Laptop

The SlimSCSI 1460 Card can be installed in your laptop based on the illustration below:

Insert the card into your laptop. Make sure the card is inserted completely into the slot.

Take one end of the SCSI cable that comes with the 1460 card and plug it into the card. The

cable should click into place.

Plug the end of the SCSI cable into the TOP port of the DVD player.

Included in the DVD package there is a small grey connector, called a “terminator”. Put the

terminator on the BOTTOM port of the DVD player.

Plug the power cable into back of the DVD player, and turn the DVD player on.

Plug the power cable back into your computer, and turn your laptop on.

When you turn your computer on, Windows will detect the card and install the appropriate

drivers automatically.

At this point your computer may ask you for the Windows CD-ROM disc. Your computer needs

to copy the SCSI card drivers from the CD-ROM onto your hard drive. If you have a CD-ROM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Adaptec APA-1350 Guide d'installation Page 26