Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Manuel d'instructions télécharger pdf (Page 26)

SCSI Card 2930U2 User’s Reference

■ BIOS Multiple LUN Support—When set to Yes, the SCSI card

BIOS provides boot support for a SCSI peripheral with multi-

ple LUNs. Leave this setting set to No if your boot device does

not have multiple LUNs.

■ Include in BIOS Scan—When set to Yes, the SCSI card BIOS

includes the peripheral as part of its BIOS scan at bootup.

Advanced Configuration Options

Note:

Do not change the Advanced Host Adapter Settings

unless absolutely necessary.

■ Reset SCSI Bus at IC Initialization—When set to Enabled, the

SCSI card generates a SCSI bus reset during its power-on ini-

tialization and after a hard reset.

■ Extended BIOS Translation for DOS Drives > 1 GByte—

When set to Enabled, provides an extended translation scheme

for SCSI hard disks with capacities greater than 1 GByte. This

setting is necessary only for MS-DOS 5.0 or above; it is not

required for other operating systems.The extended translation

scheme supports disk drives as large as 8 GBytes.

To partition a disk larger than 1 GByte controlled by the SCSI

card BIOS, use the MS-DOS Fdisk command.

Caution:

Back up your disk drives before changing the

translation scheme.

■ Host Adapter BIOS (Configuration Utility Reserves BIOS

Space)—Enables or disables the SCSI card BIOS.

■ Set to Enabled if you boot from a SCSI disk drive con-

nected to the SCSI card.

■ Set to Disabled if the peripherals on the SCSI bus (for

example, CD-ROM drives) are controlled by software driv-

ers and do not need the BIOS.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Pas de commentaire

Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Manuel d'instructions Page 26