Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Manuel d'instructions télécharger pdf (Page 22)

SCSI Card 2930U2 User’s Reference

Starting SCSI

Select

Follow these steps to start SCSISelect:

Turn on or restart your system.

During the startup process, pay careful attention to the mes-

sages that appear on your screen.

When the following message appears on your screen, press the

Ctrl-A keys simultaneously (this message appears for only a

few seconds):

Press <Ctrl><A> for SCSISelect (TM) Utility!

From the menu that appears, use the ↑ and ↓ keys to move the

cursor to the option you want to select, then press Enter.

BIOS Multiple LUN Support Yes, No No (Disabled)

Include in BIOS Scan Yes, No Yes (Enabled)

Advanced Host Adapter Settings:

Reset SCSI Bus at IC Initialization Enabled, Disabled Enabled

Extended BIOS Translation for

DOS Drives > 1 GByte

Enabled, Disabled Enabled

Host Adapter BIOS Enabled, Disabled Enabled

Support Removable Disks Under BIOS as

Fixed Disks

Boot Only,

All Disks, Disabled

Boot Only

Display <Ctrl> <A> Messages during BIOS

Initialization

Enabled, Disabled Enabled

BIOS Support for Bootable CD-ROMs

Enabled, Disabled Enabled

BIOS Support for Int 13 Extensions

Enabled, Disabled Enabled

A SCSI Card is also called a host adapter. It is always referred to as a “host adapter” within

SCSI

Select

Setting is valid only if Multiple LUN Support is enabled.

Disconnection is enabled for all devices except hard disk drives.

Settings are valid only if host adapter BIOS is enabled.

Table 1. SCSI

Select

Settings

(Continued)

SCSI

Select

Option Available Settings Default Setting

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

Commentaires sur ces manuels

Pas de commentaire

Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Manuel d'instructions Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour appareils photo Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps