Adaptec 2100S - SCSI RAID Controller Guide de l'utilisateur télécharger pdf (Page 115)

4-7

RAIDUTIL Command Line Utility

RAID Operation

-C Load/save configuration

This switch has two options:

A file name must follow the load or save parameter. This is a .dsm

file, which can also be loaded or saved using Storage Manager.

-r Specify task rate

This switch sets a task priority for the device or logical drive. The

parameter can be 0 – 9; with 0 being the slowest and 9 being the

fastest. You can also specify the rate as follows:

The device address is required. Specify logical drives by their device

addresses. You can set the rate for all logical drives on a controller by

using the device address of the controller.

-w Write caching

Options are On and Off. The default (On) uses Write-Back caching.

Off sets the operation to Write-Through caching. Specify drives

using the device address.

load Loads the specified configuration file

save Saves the current configuration to the file name

specified

-r slow = 1

-r medslow = 3

-r med = 5

-r medfast = 7

-r fast = 9

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 134 135

Pas de commentaire

Adaptec 2100S - SCSI RAID Controller Guide de l'utilisateur Page 115