Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guide d'installation télécharger pdf (Page 19)

Known Problems and Limitations

The Adaptec AHA-1510A adapter cannot be a primary (boot) disk controller since it

has no BIOS. Boot from a disk attached to another controller.

Conﬁguration Procedure

If necessary, enable support for disks greater than 1 Gbyte.

On the AHA-1530P and AHA-1532P, use the on-board utility (press Ctrl-A at

boot time) to select this option from the Advanced Features menu.

On the AHA-1522A and AHA-1520A, set this option by adding a jumper to pin

0 (the rightmost pin) of jumper block J5.

If necessary, make the following termination changes:

On the AHA-1510A, AHA-1520A, and AHA-1522A, remove the three

terminating resistors from the controller.

On the AHA-1530P and AHA-1532P, set termination using the on-board utility.

Device Reference Pages 7

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 126 127

Pas de commentaire

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guide d'installation Page 19