Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guide d'installation télécharger pdf (Page 45)

a. Type DPTFMT and press Enter.

b. Press Enter to begin, and again to continue.

c. Press <F3> to enter SCSI ID 0 and LUN 0, and press <F3> to continue.

d. Use the down arrow to select MS-DOS and PC DOS.

e. Press Enter to write out the drive geometry, and press Enter to reboot.

3. Insert the user copy diskette of the ECU (CF.EXE) containing the

!DPTxxx.CFG ﬁles.

a. At the A:> prompt, type CFG and press Enter.

b. At the Viewer Edit Details screen, press Enter.

c. Press the down arrow to the DPT SCSI HBA to select parameters and set

them as follows:

• Bus: Enabled

• IDE Boot Address: Primary

• Option ROM Address: Default

• SCSI ID HBA: Default 7

• WD1003: Emulation off for both drive 0 and 1

d. Press <F10> to save your changes.

4. Insert a copy of the boot diskette.

5. Press Enter to reboot DOS.

Device Reference Pages 33

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 126 127

Pas de commentaire

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guide d'installation Page 45