Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guide d'installation télécharger pdf (Page 126)

2. Boot the system.

3. Insert the PC Card ATA device.

Identifying an Unrecognized Card

If you insert a PC Card ATA device and it isn’t recognized (no special ﬁles are

created), use the prtconf command to try to identify the problem.

1. Run the prtconf -D command to see if your pcata card is recognized.

A recognized device will appear at the end of the prtconf output. For example:

# prtconf -D

...

pcic, instance #0 (driver name: pcic)

...

disk, instance #0

2. If pcata does not appear in the prtconf output, there is a problem with the

PC Card adapter conﬁguration or with the hardware.

Check to see whether the problem is with the card or the adapter by trying to use

the card on another machine and by seeing if it works on the same machine using

DOS.

Special Files

For PC Card devices, nodes are created in /devices that include the socket number

as one component of a device name that the node refers to. However, the

/prtc/dev names and the names in /dev/dsk and /dev/rdsk do follow the

current convention for ATA devices, which do not encode the socket number in any

part of the name. See the pcata(7D) man page.

Hot-Plugging

If you want to remove the disk, you must unmount the ﬁle system.

If you want to create a pcfs ﬁle system, use a DOS machine. To mount a pcfs

ﬁle system, type:

# mount -F pcfs /dev/dsk/c#d#p0:c /mnt

For more information, see the pcfs(7FS) and mount(1M) man pages.

If you want to create a ufs ﬁle system, use the newfs command and type:

114

Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998

1 2 ... 121 122 123 124 125 126 127

Pas de commentaire

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guide d'installation Page 126