Adaptec AVA-2906 Guide d'installation télécharger pdf (Page 7)

SCSI Card 2906

In Device Manager, double-click Computer at the top of the

list.

In the Computer Properties window, click Interrupt request

(IRQ) (if it is not already selected) as shown in the following

sample screen:

■

The Settings column lists the IRQs in use. IRQ settings range

between 0 and 15. If an IRQ setting is not listed under Settings

this means it is available. In the screen sample above, setting 10

is not listed and, therefore, is an available IRQ.

Note:

Do not use an IRQ below IRQ 9 for a SCSI Card 2906.

Do not allow the SCSI Card 2906 and another card to share

the same IRQ.

■

If an IRQ setting is available, you may begin this installation. If

an IRQ setting is not available, you will not be able to install

this SCSI card. See the section titled Troubleshooting in Windows

95/98 in the SCSI Card 2906 User’s Reference for additional infor-

mation on IRQ settings.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Pas de commentaire

Adaptec AVA-2906 Guide d'installation Page 7