Adaptec AVA-2906 Guide d'installation télécharger pdf (Page 17)

SCSI Card 2906

Note:

If you are connecting external SCSI devices, use

SCSISelect



to set the Maximum Synchronous transfer rate

to 5 MBytes/sec. The DB-25 connector is not rated for

higher speeds. Refer to the section titled Configuring the

SCSI Card 2906 with SCSISelect in the SCSI Card 2906 User’s

Reference.

Connect the other external SCSI devices by connecting each

SCSI device to the previous one until all SCSI devices are con-

nected as shown below. Terminate only the SCSI device at the

end of the chain.

Connect all power cables to the external SCSI devices and com-

puter as shown below.

Turn

all external SCSI devices and wait for them to come to

a ready state before turning on the computer.

SCSI Device

Terminated External

Unterminated External

SCSI Device

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Adaptec AVA-2906 Guide d'installation Page 17