Adaptec AVA-2906 Guide d'installation télécharger pdf (Page 13)

SCSI Card 2906

Connect the other end of the cable to the last internal SCSI

device as shown below (this SCSI device must be terminated;

see Step 2 above).

Make sure Pin 1 on the cable aligns with Pin 1 of the internal

SCSI device’s connector. Pin 1 usually is designated by a small

triangle or “1”.

Connect the remaining connectors on the cable to any remain-

ing internal SCSI devices as shown below (do not terminate

these SCSI devices; see Step 2 above.)

Terminated Internal

SCSI Device

Internal SCSI Cable

Terminated Internal

SCSI Device

Unterminated Internal

SCSI Device

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Pas de commentaire

Adaptec AVA-2906 Guide d'installation Page 13