Adaptec AVA-2906 Guide d'installation télécharger pdf (Page 15)

SCSI Card 2906

Connecting External SCSI Devices

Be sure that each external SCSI device you are installing has a

unique SCSI ID from 0 to 6. Refer to the SCSI device’s docu-

mentation to determine the SCSI ID setting.

If any two SCSI devices (external or internal) you are connect-

ing to the SCSI Card 2906 have the same SCSI ID, change the

SCSI ID on one SCSI device. The SCSI Card 2906 is preset to

SCSI ID 7 and should not be changed.

For most external SCSI devices, the SCSI ID is set with a switch

on the back of the SCSI device as shown below. See the SCSI

Card 2906 User’s Reference for additional information on SCSI

IDs.

Connect one end of the external SCSI cable to the SCSI Card

2906 external SCSI connector as shown in the following dia-

gram. Secure the cable to the connector on the SCSI Card 2906

by tightening the thumb screws on the cable connector.

SCSI ID Switch

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Pas de commentaire

Adaptec AVA-2906 Guide d'installation Page 15