Adaptec 5405Z Guide de l'utilisateur télécharger pdf (Page 47)

Chapter 6: Creating a Bootable Array ● 47

7 Review the information that is displayed.

Note:

In DAS environments, Adaptec Storage Manager uses the term logical drives when

referring to arrays (see page 12).

In this example, Adaptec Storage Manager has used thirteen equal-sized disk drives to

automatically create one logical drive with RAID 5 and a hot spare.

To exclude specific disk drives from the logical drive, specify a size for the logical drive, or

to make other changes to the configuration, click Modify logical devices.

8 Click Apply, then click Ye s when prompted to confirm applying your new configuration.

Adaptec Storage Manager builds the logical drive.

The configuration is saved on the Adaptec controller (as an “array”, see page 12) and on

the physical disk drives.

9 Partition and format your logical drive.

The logical drive you created appears as a physical disk drive on your operating system.

Yo u must partition and format these logical drives before you can use them to store data.

10 Close all windows, then click Reboot to restart your system.

11 Remove the Adaptec RAID Controller Installation DVD.

For information on installing and using Adaptec Storage Manager as a full software

application, refer to the Adaptec Storage Manager User’s Guide or online Help.

12 Continue with the following section.

Making Your Array Bootable

Use the ACU to make the array bootable (see Creating Bootable Arrays on page 85).

Then c

ontinue with

Installing the Driver and an Operating System

on page 48

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 135 136

Pas de commentaire

Adaptec 5405Z Guide de l'utilisateur Page 47