Adaptec 5405Z Guide de l'utilisateur télécharger pdf (Page 40)

Chapter 5: Installing the Controller and Disk Drives ● 40

3 When all internal disk drives have been installed and connected, close your computer

cabinet, reattach the power cord, then continue with

Connecting External Devices

on page 42

Connecting MaxIQ Solid State Drives and other SSDs

To connect an Adaptec MaxIQ Solid State Drive or other SSD to your controller, use a direct-

attached connection or a backplane connection. If your server does not have a standard 2.5-

inch drive tray, you must use a bracket/SLED which enables the SSD to fit properly (not

included with MaxIQ SSD kit).

Note:

For MaxIQ caching applications, you can use any Solid State Drive on the compatibility

list, including Adaptec MaxIQ-branded SSDs and, with Adaptec Q-series controllers, select

SSDs from other manufacturers. For RAID arrays, you can use any Solid State Drive on the

compatibility list. See www.adaptec.com/compatibility for a list of MaxIQ-compatible Solid

State Drives.

Disk drives or

SSDs on

backplane

Controller connected to backplane

with Internal mini-SAS to mini-SAS

(SFF-8087 to SFF-8087)

Controller connected to backplane

with multi-lane cable (SFF-8484)

Disk drives or

SSDs on

backplane

External SAS cable

connecting to a

drive bay

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 135 136

Pas de commentaire

Adaptec 5405Z Guide de l'utilisateur Page 40