Adaptec 29160N - SCSI Card Storage Controller U160 160 MBps Spécifications télécharger pdf (Page 28)

Adaptec SCSI Card 29160N User’s Reference

Advanced Configuration Options

Note:

Do not change the Advanced Configuration Options

unless absolutely necessary.

■

Reset SCSI Bus at IC Initialization

—(Default:

Enabled

) When

set to

Enabled

, the SCSI card generates a SCSI bus reset during

its power-on initialization and after a hard reset.

■

Extended BIOS Translation for DOS Drives > 1 GByte

—

(Default:

Enabled

) When set to

Enabled

, provides an extended

translation scheme for SCSI hard disks with capacities greater

than 1 GByte. This setting is necessary only for MS-DOS 5.0 or

above; it is not required for other operating systems, such as

NetWare or UNIX.

Use the MS-DOS

Fdisk

command to partition a disk larger

than 1 GByte controlled by the SCSI card BIOS, when using

DOS, Windows 3.1.x, or Windows 95/98.

Caution:

Back up your disk drives before changing the

translation scheme.

■

Verbose/Silent Mode

—(Default:

Verbose)

When set

Ve r b o se

the SCSI card BIOS displays the host adapter model on the

screen during system buildup. When set to

Silent

, the message

will not be displayed during bootup.

■

Host Adapter BIOS (Configuration Utility Reserves BIOS

Space)

—(Default:

Enabled

) Enables or disables the SCSI card

BIOS.

■

Leave at

Enabled

to enable the SCSI card BIOS and allow it

to scan and initialize all SCSI devices.

■

Set to

Disabled: Not scan

if the devices on the SCSI bus (for

example, CD-ROM drives) are controlled by software driv-

ers and do not need the BIOS, and you do not want the

BIOS to scan the SCSI bus.

■

Set to

Disabled: Scan Bus

if you do not need the BIOS, but

you want it to scan the SCSI devices on the bus.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

Adaptec 29160N - SCSI Card Storage Controller U160 160 MBps Spécifications Page 28

Commentaires sur ces manuels