search

Adaptec 29160N - SCSI Card Storage Controller U160 160 MBps Spécifications Page 26

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 38
  • Table des matières
  • DEPANNAGE
    •
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 25
20
Adaptec SCSI Card 29160N User’s Reference
Basic Host Adapter Options
■
Host Adapter SCSI ID
—(Default:
7
) Sets the SCSI ID for the
SCSI card. The Adaptec SCSI Card 29160N is set at
7
, which
gives it the highest priority on the SCSI bus. We recommend
that you do not change this setting.
■
SCSI Parity Checking
—(Default:
Enabled
) When set to
Enabled
, verifies the accuracy of data transfer on the SCSI bus.
Leave this setting enabled unless any SCSI device connected to
the Adaptec SCSI Card 29160N does not support SCSI parity.
■
Host Adapter SCSI Termination
—(Default:
Automatic
) Deter-
mines the termination setting for the SCSI card. The default
setting for both the Ultra160-LVD connector and Fast/Ultra-SE
connector is
Automatic
. We recommend that you do not change
these settings.
Boot Device Options
■
Boot Target ID
—(Default:
0
) Specifies the SCSI ID of your boot
device.
■
Boot LUN Number
—(Default:
0
) Specifies which LUN (Logi-
cal Unit Number) to boot from on your boot device. This set-
ting is not valid unless Multiple LUN Support is
Enabled
(see
Advanced Configuration Options
on page 22).
SCSI Device Configuration Options
Note:
To configure settings for a SCSI device, you must
know its SCSI ID (see
Using SCSI Disk Utilities
on page 24).
■
Maximum Sync Transfer Rate
—(Default:
160.0
) Determines
the maximum synchronous data transfer rate the SCSI card
supports. Use the maximum value of 160.0 MBytes/sec. If your
device is not Ultra160, select a transfer rate of 10.0 MBytes/sec.
■
Enable Disconnection
—(Default:
Ye s
) When set to
Yes
, allows
the SCSI device to disconnect from the SCSI bus. Leave the set-
ting at
Yes
if two or more SCSI devices are connected to the
SCSI card. If only one SCSI device is connected, changing the
setting to
No
results in slightly better performance.
Vue de la page 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Commentaires sur ces manuels

Pas de commentaire
  • Calorex Teslanol K-tec EasyGate Dialogic
  • Amcor Déshumidificateurs Honeywell Enregistreurs vidéo numériques (DVR) Ricoh Multifonctionnels Garmin Matériel d'enregistrement Candy Machines à laver
  • Winegard Carryout Acer KA270H Sony DAV-TZ230 Dymo ExecuLabel LM450 Western Digital My Book Essential 1TB
  • LG 32FS2RNB Manuel de l'utilisateur Sony NW-S21 Manuel de l'utilisateur D-Link DGS-1216T - Switch Spécifications Samsung SM-G600FY Manuel de l'utilisateur Philips SC5275/10 Manuel de l'utilisateur