Adaptec 29160N - SCSI Card Storage Controller U160 160 MBps Spécifications télécharger pdf (Page 19)

Using the Adaptec SCSI Card 29160N and SCSI Devices

Ultra160 Hard Disk Drives

■

We recommend keeping your Ultra160 SCSI devices separate

from your non-Ultra160 SCSI devices. Connecting a non-

Ultra160 SCSI hard disk drive to the Ultra160 SCSI connector

on the Adaptec SCSI Card 29160N causes the Ultra160 SCSI

segment of the SCSI bus to drop down to Ultra SCSI perfor-

mance levels (40 MBytes/sec).

■

Be sure to connect your Ultra160 SCSI hard disk drives to the

LVD/SE SCSI connector on the Adaptec SCSI Card 29160N if

you want Ultra160 performance (160 MBytes/sec).

■

Internal Ultra160 SCSI devices come from the factory with ter-

mination disabled and cannot be changed. Proper termination

is provided by the terminator at the end of the internal

Ultra160 SCSI cable.

Scanners

If you connect a scanner to the SCSI Card 29160N, you must install

the scanner manufacturer’s proprietary software drivers. See your

scanner’s documentation for details.

68-pin Internal

LVD/SE Connector

50-pin Internal Fast/

Ultra-SE Connector

50-pin External High

Density Fast/Ultra-SE

Connector

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Pas de commentaire

Adaptec 29160N - SCSI Card Storage Controller U160 160 MBps Spécifications Page 19