Adaptec 2906 - SCSI Card Storage Controller Fast 10 MBps Guide d'installation télécharger pdf (Page 12)

SCSI Card 2906 User’s Reference

■

If the driver is listed but has an exclamation mark inside a

yellow circle, the software driver may be in conflict with

other hardware using the same resources. Double-click the

icon to see the device status and possible solutions.

■

If the driver is listed but has an “X” inside a red circle, the

SCSI Card 2906 software driver is disabled and isn’t load-

ing (see below).

■

If the SCSI Controller icon or the SCSI Card 2906 driver is

not listed, reinstall the driver.

Note:

Software upgrades (including downloadable drivers)

for Adaptec products are available on the Adaptec Web Site

http://www.adaptec.com

Why does an “X” inside a red circle appear by the SCSI Card 2906

software driver in Device Manager?

The SCSI Card 2906 software driver is disabled and isn’t loading. To

enable the driver:

Double-click the

SCSI card software driver

in Device Man-

ager.

Open the

General

tab and check the

Original Configuration

(current) box.

Note:

In most caes, this is the result of an IRQ conflict. Refer

to the information

In Windows 95/98, where do I check for con-

flicting or unavailable resources?

on page 8.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Pas de commentaire

Adaptec 2906 - SCSI Card Storage Controller Fast 10 MBps Guide d'installation Page 12