Adaptec 2906 - SCSI Card Storage Controller Fast 10 MBps Guide d'installation télécharger pdf (Page 18)

SCSI Card 2906 User’s Reference

How do I use the Hardware Conflict Troubleshooter in Windows 95/98?

Click the

Start

button, then click

Help

From the

Contents

tab, double-click

Troubleshooting

Double-click

If you have a hardware conflict.

Follow the step-by-step instructions in the Windows Help

window.

Common Error Messages

“Device connected, but not ready”

The SCSI card received no answer when it requested data from an

installed SCSI device.

■

Make sure the drive is set to spin up when the power is

switched on. (See the documentation for the device.) If you still

have problems, you may have a bad drive. If you can still

access your computer, follow these steps:

Click the

Start

button, point to

Programs

Accessories

Sys-

tem

To o ls

, and then click

ScanDisk

Click

Start

and then wait a few moments for results.

“Time-out failure during...”

An unexpected time-out occurred.

■

Verify that the SCSI bus is properly terminated.

■

Verify that all cables are properly connected.

■

Disconnect the SCSI cables from the SCSI card and then start

the computer. If the computer successfully restarts, one of the

SCSI devices, cable, or terminator may be defective.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

Adaptec 2906 - SCSI Card Storage Controller Fast 10 MBps Guide d'installation Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Cartes/adaptateurs d'interface Adaptec 2906 - SCSI Card Storage Controller Fast 10 MBps