Adaptec USB2connect Host Bus Adapter Manuel d'utilisateur

RUSB2connect Host Bus AdapterUser’s Guide

5Installing USB2connect4 Replace the slot cover screw. When installed properly, the card should be level with the expansion slot.5 Close the computer

6USB2connect User’s GuideInstalling the Windows DriversOnce the USB2connect is installed in your computer, complete the following steps as appropriate

7Installing the Windows Drivers2 If you see a message that the PCI Universal Serial Bus driver was not located, select the option Automatic search for

8USB2connect User’s Guide4 To verify that the driver is installed under the Universal Serial Bus Host Controller section right-click My Computer, sele

9Installing the Windows DriversWindows 2000 Note: You must be logged on as Administrator or have administrator privileges to install USB2connect in th

10USB2connect User’s Guide3 On the Install Hardware Device Drivers window, select the option Search for a suitable driver for my device (recommended).

11Installing the Windows Drivers5 On the Driver Files Search Results window, select the default option Disable the device. Otherwise the operating sys

12USB2connect User’s Guide6 To verify that the driver is installed under the Universal Serial Bus Host Controller section, right-click My Computer, se

13Installing the Windows DriversWindows 98 SEBecause the USB2connect has three controllers, (two OCI USB 1.1 and one EHCI USB 2.0) Windows 98 SE requi

14USB2connect User’s Guide4 Select The updated driver (recommended). Click Next.5 You may see a message that Windows is searching for the driver. Clic

iCopyright© 2001 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored, in a retrieval system, or transmitted in an

15Installing the Windows Drivers7 Type the drive letter for your CD-ROM drive in the Copy files from box as shown below and click OK. Note: If you hav

16USB2connect User’s Guide9 At this point, the driver for the first OHCI (USB 1.1) controller is installed. To install the driver for the second OHCI

17Installing the Windows Drivers11 To verify that the drivers are installed under the Universal Serial Bus Host Controller section, right-click My Com

18USB2connect User’s GuideInstalling the Macintosh Driver1 Power up the computer. Insert the USB2connect CD into your CD-ROM drive.2 Double-click the

19Connecting USB DevicesConnecting USB DevicesYou can connect standard USB 1.1 or high-speed USB 2.0 devices to the external or internal connectors on

20USB2connect User’s GuideTroubleshootingIf you have problems while installing USB2connect, check the following:Note: If you experience any performanc

21Troubleshootingc In the window that appears, scroll down to the PCI area and click the arrow next to each PCI slot to reveal the PCI adapter informa

© 2001 Adaptec, Inc. All rights reserved. P/N: 512882-06, Ver AA KM 05/01R

iiAdaptec Customer SupportIf you have questions about installing or using your Adaptec product, check this document first—you will find answers to mos

iiiEurope Visit our Web site at http://www.adaptec-europe.com. English and French: To speak with a Technical Support Specialist, call one of the fol

ivRegulatory Compliance StatementsFederal Communications Commission Radio Frequency Interference StatementWARNING: Changes or modifications to this un

1OverviewUSB2connect Host Bus AdapterThe Adaptec USB2connect Host Bus Adaper is a USB 2.0 PCI host adapter for PC and Macintosh computers that provide

2USB2connect User’s GuideUSB2connect Driver InformationUSB2connect is a multifunction device. It has two OHCI (USB 1.1) controllers and one EHCI (USB

3OverviewContents of Box One Adaptec USB2Connect Host Bus Adapter (AUA-3100LP or AUA-5100) One 10-foot (3-meter), USB 2.0 certified, high-speed cab

4USB2connect User’s GuideInstalling USB2connectDischarge any static electricity buildup by touching a grounded metal object (such as the exposed metal