Adaptec USB2connect Host Bus Adapter Manuel d'utilisateur télécharger pdf (Page 9)

USB2connect User’s Guide

Installing USB2connect

Discharge any static electricity buildup by touching a grounded

metal object (such as the exposed metal parts on the back of your

computer) before handling the USB2connect adapter.

WARNING: Turn OFF power to the computer and disconnect

the power cord.

1 After you turn OFF your computer and unplug the power cord,

open the computer cabinet.

Note: See your computer documentation for specific

instructions on opening your computer cabinet.

2 Locate an unused 32-bit or 64-bit PCI expansion slot and

remove the expansion slot cover. Save the cover screw for use

in Step 4.

3 Insert the USB2connect into the PCI expansion slot. Press

down firmly until the card clicks into place.

Note: Some PCI slots may need considerable force to insert

the card completely.

Slot Cover

Expansion

Slot Cover

Screw

64-bit PCI Slot

32-bit PCI Slot

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 26 27

Pas de commentaire

Adaptec USB2connect Host Bus Adapter Manuel d'utilisateur Page 9