Adaptec USB2connect Host Bus Adapter Manuel d'utilisateur télécharger pdf (Page 10)

Installing USB2connect

4 Replace the slot cover screw. When installed properly, the card

should be level with the expansion slot.

5 Close the computer cabinet and reattach the power cord.

The USB2connect AUA-5100 adapter shares one internal and external

connector so that only five can be used at one time. The default setting is

that all external connectors are Enabled, and the internal connector is

Disabled. To switch these settings so that the internal port is enabled, set the

jumpers according to the figure below.

Changing jumpers on the AUA-5100:

All 5

external

ports

enabled

External Port Enabled (default)

jumpers

disabled

enabled

These 4

ports

enabled

jumpers

Internal Port Enabled

disabled

enabled

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Pas de commentaire

Adaptec USB2connect Host Bus Adapter Manuel d'utilisateur Page 10