Adaptec ULTRA160 Guide de l'utilisateur télécharger pdf (Page 26)

2-14

Ultra160 Family Manager Set User’s Guide

adpu160m.sys

Error Messages

The following error messages are listed sequentially according to the

last three digits of the error message. For example, [xxxxx010],

[xxxxx011], [xxxxx012], etc.

Note:

When reporting problems to Customer Support, be

sure to include the complete error message in your problem

description.

[xxxxx004] Command completed with error

[xxxxx005] Command completed with error

[xxxxx006] Command completed with error

A request issued to a target device completed with indication that

there is an error. In most cases, the error is recovered and normal

operations continues.

[xxxxx010] Error issuing command

An error has occurred while the driver was setting up its internal

data structures.

[xxxxx011] Error issuing command

The requested command is not supported by this driver.

[xxxxx012] Error issuing command

[xxxxxx99] Error issuing command

The driver does not recognize the target device.

[xxxxx021] Target device protocol error

An unexpected event occurred during data transfer between the

adapter and target device. Normally, this indicates a faulty or non-

compliant target device.

[xxxxx022] Adapter or target device protocol error

The adapter or target device has broken the communication

protocol. A badly behaving device could cause this message to

appear. Normally this is not a serious problem. If you get this

message frequently over a short period of time, it could indicate that

the device or system is malfunctioning. Unplug or power down

unused devices to see if the problem persists.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Pas de commentaire

Adaptec ULTRA160 Guide de l'utilisateur Page 26