Adaptec 1210SA - Serial ATA RAID Controller Guide de l'utilisateur télécharger pdf (Page 15)

1-5

Introduction

Controller Features

The Adaptec 1210SA supports the following features:

■

RAID levels 0, 1 and simple volume using Adaptec’s HostRAID



technology.

■ PCI Local Bus Specification, Revision 2.2 with PCI clock speeds

up to 66 MHz.

■ Operating system independent configuration and RAID

creation using Adaptec RAID Configuration (ARC).

■

Easy array configuration and status using Adaptec Storage

Manager



–

Browser Edition.

■ Flash ROM for easy upgrades of controller BIOS and ARC.

■ Event logging and broadcasting, including messaging for

alphanumeric pagers.

Overview of the Installation Process

The following steps provide an overview of the process of

installing, setting-up, and configuring the controller:

1 Read and understand this entire chapter.

2 Install and configure the controller and hard drives according to

the instructions in Chapter 2, Installing the Controller.

3 In Chapter 3, Installing the Driver, the procedure depends on the

needs of your system:

In a new system...

a Build the array.

b Install the controller driver at the beginning of the operating

system installation.

In an existing system...

a Install the controller driver.

b Build the array.

Note: Visit www.adaptec.com for the most recent driver

downloads.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Pas de commentaire

Adaptec 1210SA - Serial ATA RAID Controller Guide de l'utilisateur Page 15