Adaptec AMM-1510M Guide d'installation télécharger pdf (Page 9)

AMM-1525M/1510M/525M Installation Guide

Part Number: 510659-00, Rev. A

Print Spec Number: 492931-00

Current Date: 9/19/94 ECN Date: 9/27/94

■ For each IDE controller, the first IDE device must

be configured as the master device, and the sec-

ond (if any) as the slave device. See your IDE

device documentation for details.

Connecting Audio Equipment

You can connect a variety of audio equipment to the

AMM-1525M/1510M/525M, such as a microphone,

headphone, powered or nonpowered internal/exter-

nal speakers, tape deck, CD player, joystick, and

MIDI devices, etc. The following figure shows some

of the audio equipment you can use and where to

connect the equipment on the bracket of the

AMM-1525M/1510M/525M.

Note: To connect audio input from an internal

CD-ROM drive to the CD Audio Input con-

nector (J3) on the AMM-1525M/1510M/

525M, a special cable is needed (refer to your

CD-ROM documentation and the

AMM-1525M/1510M/525M User’s Guide). The

pinouts for J3 are listed as follows:

Pin Signal Name

1 Ground

2 Right

3 Ground

4Left

MIC IN OUT SPKR

Headphones/

Speakers

Line Out

Line In

Microphone

Game/

MIDI Port

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Adaptec AMM-1510M Guide d'installation Page 9