Adaptec 2920C - AHA Guide d'installation

RAdaptec, Inc.691 South Milpitas Blvd.Milpitas, CA 95035Copyright © 1995, 1996, Adaptec, Inc. All rights reserved. No part of this publication may be

9FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F

RAdaptec, Inc.691 South Milpitas Blvd.Milpitas, CA 95035Copyright © 1995, 1996, Adaptec, Inc. All rights reserved. No part of this publication may be

1IntroductionThis installation guide provides the instructions needed to install and use your new SCSI host adapter. Once you have performed the simpl

2Installation and SetupWARNING: Turn OFF power to the computer and disconnect the power cord.Step 1: Remove the cover from the computer case. (If nece

3Step 3: Insert the host adapter in the slot; press down firmly so that the bus contacts are securely seated in the slot. Secure it with the screw you

4Step 6: Plug one end of the internal SCSI cable into the host adapter’s internal SCSI connector. If you purchased your host adapter in an Adaptec ki

5Step 10: Prepare each external SCSI device for installation. If you are not installing external SCSI devices, skip to Step 13. Make sure all SCSI de

6Step 13: Reinstall your computer cover and connect all power cables; turn on your computer.Step 14: Install the appropriate device driver for your op

7Multiple Host Adapters Multiple SCSI host adapters can be installed in your computer; you are limited only by available system resources (e.g., I/O

8Need Assistance?Troubleshooting ChecklistMost problems that occur with your host adapter result from errors in preparing and connecting devices on th