Adaptec 2940U2W Guide d'installation télécharger pdf (Page 11)

STEP 1

68-pin External Ultra2 SCSI Connector

Use the 68-pin external Ultra2 SCSI connector to connect your exter-

nal Ultra2 peripherals. Ultra2 external cables are not included in the

kit. For each external Ultra2 peripheral, you will need to obtain a 68-

pin external Ultra2 SCSI cable. Follow these steps to connect your

external Ultra2 SCSI peripherals:

High-density 68-pin

External Ultra2 SCSI Cable

(Not Included in Kit)

68-pin External Ultra2

SCSI Connector

When using the internal-to-external Ultra SCSI cable, the

50-pin external connector itself, or the last external peripheral con-

nected to the connector, must have a SCSI terminator installed.

NOTE

Terminate Here

WRONG!

Not Terminated Here

Connect one end of the external SCSI cable to the external Ultra2 con-

nector on the SCSI Card 2940U2W.

We recommend keeping your Ultra2 peripherals separate

from your non-Ultra2 peripherals. Connecting a non-Ultra2

peripheral to the Ultra2 SCSI connector forces the Ultra2 SCSI seg-

ment and any attached peripherals to drop down to Ultra SCSI

performance levels (40 MBytes/sec). (See “Bus Segments on the

SCSI Card 2940U2W” on page 2.)

NOTE

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Adaptec 2940U2W Guide d'installation Page 11