Adaptec 1520A - AHA Storage Controller Fast SCSI 10 MBps Guide de l'utilisateur télécharger pdf (Page 47)

3-13

Hardware Installation

AHA-1510A/20A Series User’s Guide

Stock Number: 510400-00, Rev. C Page: 3-13

Print Spec Number: 491842-00

Current Date: 11/18/94 ECN Date: 11/29/94

Completing Installation

Before you reassemble your computer, be sure that

■ The host adapter is firmly seated and secured in the slot

■ The devices on each SCSI bus are properly terminated

■ Each SCSI device on the SCSI bus has a unique SCSI ID

■ Internal and external SCSI devices are firmly connected to the

host adapter, and pin-1 orientation is correct

■ Only one floppy controller is enabled (AHA-1522A only)

Many computers have floppy controllers on the motherboard

or on a non-SCSI controller.

Follow these steps to complete installation:

1 Replace and secure the cover of the computer case.

2 Reconnect the power cords to all external SCSI devices and the

computer.

3 Turn ON the power to all devices.

4 Boot the computer.

See Chapter 5, Troubleshooting, if you encounter any problems during

installation.

❒

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 61 62

Pas de commentaire

Adaptec 1520A - AHA Storage Controller Fast SCSI 10 MBps Guide de l'utilisateur Page 47