Adaptec CDP-00278-02-A Guide de l'utilisateur télécharger pdf (Page 68)

• To congure power management for a logical drive, see Setting Power Management Options for a

Logical Drive on page 68.

• To congure power management for a controller, see Setting Power Management Options for a

Controller on page 69.

• To disable power management on a logical drive, see Disabling Power Management for a Logical

Drive on page 70.

Note: To see if your controller supports power management, select the controller in

the Enterprise View then, on the Storage Dashboard, click the Properties tab. If the

Key Features section includes 'Intelligent Power Management', the controller supports

the power management features. You can check for power management support on

the Storage Dashboard for controllers, logical drives, and physical drives.

Setting Power Management Options for a Logical Drive

This section describes how to set the power management options for an existing logical drive. You can

also set the power management options when you create a logical drive in the wizard (see Custom

Conguration on page 41).

For each logical drive in your storage space, you can a set a timer to reduce the disk drive spin rate

(RPM), turn disk drives off, and verify the health of inactive drives.

Note: We do not recommend enabling power management for logical drives with

shared physical drives; that is, logical drives that include segments of the same physical

drives. Placing logical drives with these characteristics under power management may

limit the power savings benet in your storage space.

To set the power management options for a logical drive:

1. In the Enterprise View, select a controller, then select a logical drive.

2. On the ribbon, in the Logical Disk group, click Set Properties.

The Set Properties window opens.

3. Click the Power tab.

4. In the Power Settings drop-down list, select Enabled.

5. Select a value for each timer from the drop-down lists:

68Proprietary and Condential to PMC-Sierra, Inc.

Document No.: CDP-00278-02-A Rev. A, Issue:

maxView Storage Manager User's Guide

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 132 133

Pas de commentaire

Adaptec CDP-00278-02-A Guide de l'utilisateur Page 68