Adaptec CDP-00278-02-A Guide de l'utilisateur télécharger pdf (Page 65)

DescriptionOptions

...click Verify with x.To repair inconsistent or bad data during

verication

...click Verify.To verify the maxCache Container without

xing bad data

...click Coherency Check, then select Once or Always

from the drop-down list.

To perform a coherency check on the

maxCache meta-data

5. Click OK.

Caution: Do not power off the system while the verication is in progress. If you

do, the verication will stop.

When the verication is complete, an event notice is generated in the system's event log, at which

time you can continue working with the controller.

Deleting the maxCache Container

When you delete the maxCache Container, the component SSDs become available and can be used to

create a new logical drive, as hot spares, or to create a new maxCache Container.

Caution: Ensure that no activity is taking place on the controller for the maxCache

Container; otherwise you may lose data.

To delete the maxCache Container:

1. In the Enterprise View, select a controller, then select the maxCache Container.

2. On the ribbon, in the maxCache group, click Delete.

3. When prompted, click Delete to delete the maxCache Container; click Cancel to cancel the action.

Changing the maxCache Settings for a Logical Drive

You can enable or disable maxCache read and write caching for each logical drive in your storage space:

1. In the Enterprise View, select a controller, then select a logical drive on that controller.

2. On the ribbon, in the Logical Disk group, click Set Properties.

3. When the Set Properties window opens, click the maxCache tab.

65Proprietary and Condential to PMC-Sierra, Inc.

Document No.: CDP-00278-02-A Rev. A, Issue:

maxView Storage Manager User's Guide

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 132 133

Pas de commentaire

Adaptec CDP-00278-02-A Guide de l'utilisateur Page 65