Adaptec 6405 Guide de l'utilisateur télécharger pdf (Page 47)

8. Click Finish.

maxView Storage Manager builds the logical drives.

9. Partition and format your logical drive.

The logical drives you created appear as a physical disk drives on your operating system. You must

partition and format these logical drives before you can use them to store data.

10. Close all windows, then click Reboot to restart your system.

11. Remove the Adaptec Installation DVD.

For information on installing and using maxView Storage Manager as a full software application,

refer to the maxView Storage Manager User's Guide.

12. Continue with the following section.

Making Your Array Bootable

Use the ARC Utility to make the array bootable (see Creating Bootable Arrays on page 83).

Then continue with Installing the Driver and an Operating System on page 48.

47Proprietary and Condential to PMC-Sierra, Inc.

Document No.: CDP-00277-02-A Rev. A, Issue:

Serial Attached SCSI RAID Controllers Installation and User's Guide

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 109 110

Pas de commentaire

Adaptec 6405 Guide de l'utilisateur Page 47