Adaptec 131U2 - AAA RAID Controller Manuel d'instructions télécharger pdf (Page 56)

5-6

AAA-130U2 Series Installation and Hardware Guide

Edit the

autoexec.bat

file to include a command line for

mscdex.exe

(the

mscdex

exe

file is included with MS-DOS 6.x

and above)

The following sample command lines for the

autoexec.bat

file are appropriate for most systems:

c:\dos\mscdex.exe /d:aspicd0 /M:12

(This assigns the CD-ROM the next available drive letter, typi-

cally D if there is only one DOS drive.)

Reboot the system to the DOS partition.

Insert the NetWare 5.0 CD in your CD-ROM drive.

Go to the CD-ROM drive.

Type Install and press Enter.

Follow the procedures in your NetWare documentation for

installing a new server.

From the Welcome to the NetWare server installation screen,

press F2 for Advanced Settings; change Load server at reboot:

from Yes to No and continue with the installation.

When NetWare detects device drivers for the server, you are

prompted to Add, Change, or Delete drivers as needed:

– Delete any Multiple Processor Support module that is

detected (for example, MPS14).

– Delete the Storage Adapters drivers for adapters that are

not present in your system.

Insert the Adaptec Array1000U2 Family Manager Set driver

disk in your floppy disk drive.

Select Storage Adapters and press Enter.

To add Storage Adapter driver, press Insert.

Press Insert again to add an unlisted driver.

Press F3 to specify a different path. Enter the following path:

a:\netware

Select Return to Driver Summary and press Enter. CDA1000 is

listed as your storage adapter.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

Pas de commentaire

Adaptec 131U2 - AAA RAID Controller Manuel d'instructions Page 56