Adaptec 131U2 - AAA RAID Controller Manuel d'instructions télécharger pdf (Page 51)

5-1

▼ ▼ ▼ ▼

Installing the Software

Driver for Novell NetWare

In this Chapter

This chapter explains how to install the AAA-131U2/133U2 soft-

ware driver (

cda1000h.ham

) for Novell NetWare (NetWare 4.11, 4.2,

and 5.0). Before installing the driver, make sure you have completed

the following:

■

Installed the AAA-131U2/133U2 in your system

(See Chapter 2)

■

Created the first array using the

ARRAYCONFIG U2

utility, if

you plan to boot from an array. (See Chapter 3)

Once NetWare and the driver are installed, install Adaptec CI/O

Management Software from the server console (CI/O is required for

array management in order to provide the proper level of fault

tolerance and event notification). Refer to the

Adaptec CI/O Manage-

ment Software User’s Guide

for instructions on installing and using the

software.

➤

Installing the Array1000U2 Driver for Novell NetWare

5-2

➤

Netware Installation and Configuration Notes

5-8

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 81 82

Pas de commentaire

Adaptec 131U2 - AAA RAID Controller Manuel d'instructions Page 51