Adaptec USBXchange Guide de l'utilisateur télécharger pdf (Page 26)

User’s Guide: USB

Xchange

•

When I power off/on my SCSI device while still connected to

USBXchange, the system does not detect the USBXchange or the

SCSI device appears to be missing. How can I correct this problem?

Try one of these steps:

1 Remove and reinsert the USBXchange from the USB port.

2 Remove the USBXchange, power off and on the SCSI devices and

reinsert the USBXchange.

3 Remove and then reattach the USBXchange to the SCSI device.

4 Restart the system with the USBXchange attached and the SCSI

devices powered on.

Shut down the system, remove the

USBXchange

, power off and on

all SCSI devices and reinsert the

USBXchange

Restart the system

when the USBXchange

is reattached.

6 Run the Uninstall utility before reinstalling the driver. See

Uninstalling the USBXchange Driver for Windows 98 and Windows

2000 on page 12 for more information.

If you continue to have problems after trying the steps listed in this

section, go to Adaptec’s World Wide Web site at http://ask.adaptec.com

If you still cannot find answers to your questions, call the numbers listed

for Adaptec Customer Support on page 28.

1 2 ... 21 22 23 24 25 26 27 28 29

Pas de commentaire

Adaptec USBXchange Guide de l'utilisateur Page 26