Adaptec GDTSETUP Manuel d'installation télécharger pdf (Page 66)

Move the selection-bar to the second entry and select Logical Drives No. 1, 3 and 4.

The "M" means Master. For a striping array (RAID 0, 4, 5, 10), this is the first Logical Drive in

the array. For a RAID 1 (mirroring) array this is the Logical Drive which contains the valid

data and which should be copied to the second Logical Drive. After pressing <ENTER>

GDTSETUP displays a list of possible RAID levels. The number of previously selected Logi-

cal Drives determines the high-lighted levels. In our case RAID 10 is not selectable, since it

requires at least 4 Logical Drives.

For this example we select RAID-5 and press <ENTER> .

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 92 93

Pas de commentaire

Adaptec GDTSETUP Manuel d'installation Page 66