Adaptec AVA-2825 Guide d'installation Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 35
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
These are the basic USB support drivers
They support motherboards with an Intel or VIA chipset.
If you do not have an Intel or VIA chipset on your motherboard you may
need to install the so called USBOHCI USB driver. You can find this
driver on CD#1 in \Softwarechoice\USB\basic\.
Install it by copying the file usbohci.exe to an empty directory on
your hard disk and start the file to begin extracting. Please read the
accompanying readme.txt on how to upgrade your USB
configuration.
There is a chance that when you booted from CD or diskettes your
USB mouse will not work. The USB mouse should work when you
boot from the hard disk the first time after installation.
BASEDEV=USBMSD.ADD
(Mass storage driver for ZIP drives, external disk drive and other
devices that confirm to the USB mass storage standard)
BASEDEV=USBCDROM.ADD
(Support for HP USB Cdwriter 8200 and Sony Spredds CDRW)
device=x:\os2\boot\usbkbd.sys
device=x:\os2\boot\usbmouse.sys
(Support for USB keyboards and mice).
device=x:\os2\boot\usbcom.sys
(Support for USB Rockwell based modems)
If you have upgraded your system via CD#2 your config.sys will
contain the following lines:
rem BASDEV=USBUHCD.SYS
rem BASEDEV=UBSD.SYS /REQ:USBUHCD$
rem BASEDEV=USBHID.SYS
rem BASEDEV=USBMSD.ADD
rem device=x:\os2\boot\usbkbd.sys
rem device=x:\os2\boot\usbmouse.sys
rem device=x:\os2\boot\usbcom.sys
To enable USB support open the config.sys in the root of your
bootdrive and remove the word REM from all the lines.
USB Network Adapters
eComStation has support for USB Ethernet apapters, which are based
on the Kawsaki KL5KUSB101 chipset. You can find this driver on CD#1
in de directory \SoftwareChoice\USB\ether, copy the file
usbether.exe to an empty directory on your hard disk and execute it.
Chapter 3: What's Next? 17
Please read the accompanying readme.txt! The following USB
ethernet network cards have been tested:
! 3COM USB Network Interface
! D-Link Corp. USB Ethernet Adapter (DSB-650)
! ADS Technologies Inc. USB Ethernet Adapter (USB-10BT)
USB Audio
The drivers to enable USB audio support can be installed by inserting
CD#2. Start minstall from the folder eComStation -> System Setup ->
Install Remove. Select \OPTIONS\USBAUDIO on CD#2 as source
directory.
USB Printers
eComStation also supports USB printers. eCS does not support all
printers attached to an USB port. To install USB printer support insert
CD#1 and read the documentation in the directory
\SoftwareChoice\USB\print. Please note that besides the driver
which needs to be installed in the config.sys also a so called PDR
file needs to be installed, which enables the USB port to be accessed
by the printerspooler.
USB CD RW devices
If you installed eComStation from CD#1 and selected USB support, you
will have Read/Write access to USB connected CDRW devices. If you
have used CD#2 to upgrade your installation and want to enable USB
CDRW and USB mass storage support you should:
! study the directory \SoftwareChoice\USB\stor of CD#1
! install OS2CDROM.DMD from CD#3, which can be found in the
directory \DRIVERS\IBM-IDE-LATEST.
PCMCIA Support
Most laptops/notebooks nowadays have one or more slots for so called
PCMCIA card / PCCard devices. These devices should have OS/2
drivers if you would like to use them with eComStation. But firstly, you
need to enable support for the PCMCIA chipset it self. eComStation
ships with "Play at Will" which provides that support. To install Play At
Will, insert CD#3 and switch to the directory \DRIVERS\PCCARD and
copy the file pccarden.exe to an empty directory on your harddisk.
Execute this file to let it selfextract. Then run the program
PCMINST2.EXE and follow the instructions on the screen.
18
eComStation Manual
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 34 35

Commentaires sur ces manuels

Pas de commentaire