Adaptec 1744 Guide d'installation télécharger pdf (Page 20)

Section Two

NetWare 386 v3.1 Installation

- The SCSI devices on the ends

the SCSI cable must have the terminators

installed. All other SCSI devices on that SCSI cable should have the

terminators removed. The AHA-1540/1542/1640/1740/l744 is considered a

SCSI device and has on-board terminators that should be removed only if

both the internal and external SCSI connectors are used at the same time.

The NetWare procedure for installing a mirrored pair

disk drives is similar to the

standard installation. The INSTALL.NLM module should be loaded from the console.

This should be done after the AHA1540.DSK, AHAl640.DSK, or AHA1740.DSK has

been loaded. Type "LOAD INSTALL." The screen should look similar

to:

ASW-1440

2-8

adoptee

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

Pas de commentaire

Adaptec 1744 Guide d'installation Page 20