Adaptec 3940AUW Guide d'installation télécharger pdf (Page 12)

AHA-3940AU/AUW Installation Guide

Part Number: 511418-00, Rev. A

Print Spec Number: 496346-00

Current Date: 3/12/97 ECN Date:3/10/97

PCI-to-PCI Bridges (PPB)? If not, contact your

computer manufacturer for a BIOS upgrade.

■

Are all SCSI devices powered?

■

Are all SCSI bus cables and power cables properly

connected?

■

Does the host adapter and each device on each

SCSI bus channel have a unique SCSI ID?

■

Are all devices on the SCSI bus terminated

properly?

■

Does your system CMOS

Setup

require you to

enable PCI bus parameters? If so, see your

computer documentation. Confirm the IRQ chan-

nel assignment.

■

Is the host adapter installed in a PCI slot that sup-

ports bus mastering? Refer to your computer doc-

umentation or move the host adapter to a

different PCI slot.

Computer Will Not Boot from a SCSI Disk Drive

If both SCSI and non-SCSI disk drives are installed in

your computer, the non-SCSI drive is always the boot

device. If the computer has only SCSI disk drives,

check the following:

Make sure your computer’s CMOS

Setup

is set to

No Drives Installed.

Make sure the boot partition of the boot hard disk

is active. (The SCSI ID is usually set with jumpers

or switches on the drive.)

Partition the disk. Follow the instructions in the

documentation for the operating system you are

using.

If this does not solve the problem, see the trouble-

shooting information in the User’s Guide. As a last

resort, back up all data on the SCSI hard disk and per-

form a low-level format with the SCSISelect Format

Disk

option.

1 2 ... 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Adaptec 3940AUW Guide d'installation Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Le serveur à l'état brut Adaptec 3940AUW