Adaptec SAS RAID Controllers Guide d'installation télécharger pdf (Page 49)

Chapter 4 Creating a Bootable Array on a SPARC System 35

▼ To Create a Logical Drive

1. Prepare to create the logical drive, as described in “To Prepare to Create a

Bootable Logical Drive on a SPARC System” on page 34.

2. From the system console, boot from the Live CD.

3. At the system prompt, access the command-line interface (CLI), and use the

./arcconf GETCONFIG command to print a list of the complete configuration

of card 1 on the system.

In the following example, note that the CLI is located in the /opt/StorMan

directory, and the name of the CLI is arcconf. All commands must start with

unless you have altered the path to include /opt/StorMan in it.

Note – Ignore any “failing to write to log files” messages that might be displayed

after running the command. The command will run successfully and will provide a

list of physical disks, card status, and logical disks. The list might be long if you

have many physical disks. If you have multiple RAID cards, you can specify them

with different numbers, starting from 1.

ok boot cdrom

# cd /opt/StorMan

# ./arcconf GETCONFIG 1

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 147 148

Pas de commentaire

Adaptec SAS RAID Controllers Guide d'installation Page 49