Adaptec 4000SAS Guide de l'utilisateur télécharger pdf (Page 93)

Appendix C: Using the Adaptec RAID Controller Utility ● 93

Creating Bootable Arrays

Note: You may need to change the system BIOS to modify the boot

order. For more information, refer to your computer’s documentation.

The controller always uses the lowest numbered array as its bootable

array.

To make an array bootable:

1 Select Manage Arrays from the main ACU menu.

2 Select the array that you want to make bootable, then press Ctrl+B.

Note: You cannot make an array bootable while it’s building,

verifying, or rebuilding.

The array’s number changes to Array 00, which makes this array the

controller’s boot array.

3 Restart your computer.

Initializing Disk Drives

If a disk drive appears grayed-out (unavailable for use in a new array), it

may need to be initialized.

To begin initializing a disk drive, select Initialize Drives from the main

ACU menu.

Caution: Do not initialize a disk drive that is part of an array.

Initializing a disk drive that’s part of an array may make the array

unusable.

Back up all data from your disk drive before you initialize it.

Rescanning Disk Drives

To begin rescanning a disk drive, select Rescan Drives from the main

ACU menu.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 133 134

Pas de commentaire

Adaptec 4000SAS Guide de l'utilisateur Page 93