Adaptec ASA-7211C/F Guide d'installation télécharger pdf (Page 37)

5-6

ASA-7211C/F Installation Guide

Using Express Setup to Configure the iSCSI Adapter

Now that you have started iConfig, you are ready to run iConfig

Express Setup to configure the adapter (initiator).

Note: In any menu, press Esc to get back to the previous menu.

When you run iConfig for the first time, Express Setup starts

automatically, and you are prompted to type the following

information for the initiator:

■ IP address

■ Subnet mask

■ Gateway address

■ iSCSI initiator name

Now that the initiator is configured, you can choose from these

options:

■ Allow iConfig to discover targets automatically—iConfig

locates and configures targets and displays target information.

■ Enter target information manually—You are prompted to type

the following information for each target:

■ Target DNS name or IP address

■ Port number

■ iSCSI target name

After you enter this information, save the settings. The Main Menu

is displayed as shown below.

ASA-7211 IG.book Page 6 Monday, February 2, 2004 10:33 AM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Pas de commentaire

Adaptec ASA-7211C/F Guide d'installation Page 37