Adaptec 1542CP - Storage Controller Fast SCSI 10 MBps Guide de l'utilisateur télécharger pdf (Page 138)

138 Enhanced OS-9 for X86 PCAT

Installing and Configuring Enhanced OS-9

ROM Utilities and Special Booters

llkermit

The llkermit ROM booter allows booting OS-9 over serial using Kermit

Protocol. You must select llkermit in the ROM options when creating the

boot image. Once the menu is displayed type ker. You should now be

able to send the image on the communications port.

llcis

The LLCIS ROM Sub-Booter allows PCMCIA devices to be initialized

for use.

The PCMCIA utility shares the same configuration information as the

LLCIS Sub-Booter.

MWOS/OS9000/80386/PORTS/PCAT/ROM/config.des

#define LLCIS_PORTcbase=0xd4000"

#define LLCIS_PARAMS"verbose=1 fixed=1"

#define IDE_CIS_PARAMS"ide0=0x320,0 ide1=0x360,0"

#define ETH_CIS_PARAMS"3com=0x340,3"

#define SERIAL_CIS_PARAMS"com=0x340,10"

The PCMCIA SOCKET SERVICES require a VADEM 465 or similar

controller.

• i82365sl step A

• i82365sl step B

• VLSI 82C146 - Note. Early versions of this chip will only work with

one socket due to chip bug.

•IBM

• Vadem

• Cirrus CLPD67xx

The PCMCIA SOCKET SERVICES do not use interrupts, and for IDE

based devices, no interrupts are used by default. If the PCMCIA device

does not work check what is reported during the boot process. The type

of PCMCIA controller as well as the device information is displayed. It

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 156 157

Pas de commentaire

Adaptec 1542CP - Storage Controller Fast SCSI 10 MBps Guide de l'utilisateur Page 138