Adaptec 9210LP Guide d'installation télécharger pdf (Page 9)

Installation Guide

You can verify the adapter and cable installation by powering up

the system and looking at the two LEDs on the bulkhead of the

adapter. Under normal operation, the LEDs operate as follows:

Upon Power-Up

•

PWR/ACT LED is on

• LNK LED is off

During Card Initialization by the Host OS

• PWR/ACT LED will flash as Fibre Channel devices are

identified

• LNK LED is off

Once the Card has been Initialized by the Host OS

• PWR/ACT LED will flash at one second intervals

• LNK LED is on if the link is up

VERIFYING THE ADAPTER

Adaptec Fibre Card 9210LP and Adaptec Fibre Card

9210LPC With Low Profile and Standard Height

Brackets

9210IG.book Page 8 Monday, April 2, 2001 11:13 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 36 37

Pas de commentaire

Adaptec 9210LP Guide d'installation Page 9