Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Instructions d'exploitation télécharger pdf (Page 145)

SE440BX Motherboard Product Guide

Upgrade the Processor

See the documentation that came with the boxed Intel Pentium II processor.

How to Install Memory

You can install from 8 MB to 384 MB of memory in the motherboard DIMM sockets. The board

has DIMM sockets arranged as banks 0, 1, and 2. The motherboard supports the following

memory features:

• 168-pin DIMMs with gold-plated contacts

• 66 or 100 MHz SDRAM

• Non-ECC (64-bit) and ECC (72-bit) memory

• 3.3 V memory only

• Single- or double-sided DIMMs in the following sizes:

DIMM Size Non-ECC Configuration ECC Configuration

8 MB 1 Mbit x 64 1 Mbit x 72

16 MB 2 Mbit x 64 2 Mbit x 72

32 MB 4 Mbit x 64 4 Mbit x 72

64 MB 8 Mbit x 64 8 Mbit x 72

128 MB 16 Mbit x 64 16 Mbit x 72

When adding memory, follow these guidelines:

• You can install DIMMs in any of the three banks.

• You can use different sizes of DIMMs in different banks.

• The BIOS detects the size and type of installed memory.

• For ECC operation to be available, all installed memory must be ECC and you must enable the

ECC Configuration feature in the Setup program (see Chapter 3).

✏

NOTE

All memory components and DIMMs used with the SE440BX motherboard must comply with the

PC SDRAM specifications. These include: the PC SDRAM Specification (memory component

specific), the PC Unbuffered DIMM Specification, and the PC Serial Presence Detect

Specification. You can access these documents through the Internet at:

http://www.intel.com/design/pcisets/memory/

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 306 307

Pas de commentaire

Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Instructions d'exploitation Page 145