Adaptec 39320D Guide d'installation télécharger pdf (Page 7)

The Adaptec SCSI Card 39320D has two separate Ultra320/160

SCSI channels, as shown in the figure on page 1. Channel A has

an internal LVD/SE connector to which you can connect internal

SCSI devices.

Follow these steps to connect your internal Ultra320/160 and

Ultra2 devices:

Locate a 68-pin internal LVD SCSI cable, which may have either

twisted wires or flat wires, as shown here.

Plug the nonterminated end of the cable(s) to the internal

LVD/SE connector.

Adaptec recommends that you keep your Ultra320/160

and Ultra2 SCSI devices on a separate SCSI channel from your

Ultra SCSI devices. This allows the newer Ultra320/160 and

Ultra2 SCSI devices to transfer data at their maximum speed.

NOTE

STEP 1

Terminated end

Nonterminated end

STEP 2

ASC-39320D IG.fm Page 6 Thursday, June 13, 2002 10:53 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Adaptec 39320D Guide d'installation Page 7