Adaptec 29320-R SCSI Card Guide d'installation télécharger pdf (Page 3)

Discharge any static electricity build-up before handling your

SCSI card by touching a grounded metal object (like the exposed

metal parts on the back of your computer).

After you turn off your computer and unplug the power cord,

remove the cover from the computer.

Locate an unused 64-bit PCI/PCI-X expansion slot and remove

the expansion slot cover. If the computer does not have a 64-bit

slot, you can install the card in a 32-bit PCI slot. The Adaptec

SCSI Card 29320 supports both 5V and 3.3V 64-bit slots. (The

expansion slot must be compliant with PCI Rev. 2.1 or PCI-X

Rev. 1.0 and must support Bus Mastering.) Save the slot cover

screw for use in Step 4.

INSTALLING THE ADAPTEC SCSI CARD 29320

STEP 1

Turn OFF power to the computer and disconnect the

power cord.

WARNING

STEP 2

STEP 3

Slot cover

screw

Expansion

slot cover

64-bit PCI slot

32-bit PCI slot

ASC-29320 IG.fm Page 2 Wednesday, August 14, 2002 2:00 PM

1 2 3 4 5 6 7 8 ... 13 14

Pas de commentaire

Adaptec 29320-R SCSI Card Guide d'installation Page 3