Adaptec 3940UW Guide d'installation télécharger pdf (Page 4)

AHA-3940U/3940UW/3940UWD Installation Guide

Part Number: 511040-00, Rev. B

Print Spec Number: 494568-00

Current Date: 11/14/96 ECN Date:11/18/96

Installing the Host Adapter

Inserting the Host Adapter in a PCI Slot

WARNING: Turn OFF and disconnect the

power to your computer and attached

devices before you remove the chassis cover.

1 Remove the cover from the computer case.

2 Locate an unused PCI expansion slot that sup-

ports bus mastering. Make sure this slot is not

obstructed by other system hardware.

PCI bus slots are usually white or ivory and are

shorter than ISA or EISA slots. Usually there are

three PCI slots. One of these may be a shared slot.

That is, it may have an ISA or EISA connector and

a PCI connector, but only one kind of board can

be inserted in the slot at any one time.

3 Remove the corresponding expansion slot cover

from the computer chassis and save the screw.

4 Hold the host adapter directly over the bus mas-

ter PCI slot and insert the end of the board in the

card guide. Carefully press the bus connector on

the bottom of the host adapter down into the slot.

5 Attach the host adapter bracket to the computer

chassis with the screw from the expansion slot

cover that you removed.

Note: Do not replace the chassis cover or

reconnect the power yet!

1 2 3 4 5 6 7 8 9 ... 13 14

Pas de commentaire

Adaptec 3940UW Guide d'installation Page 4