Adaptec 39320-R Guide d'installation

ADAPTEC SCSI CARD 39320AINSTALLATION GUIDEASC-39320A IG.fm Page 0 Tuesday, July 29, 2003 3:17 PM

93 Connect the other external SCSI devices by linking each device to the previous one, as shown below. Terminate only the device at the end of the cha

10TroubleshootingIf you have any problems while installing the Adaptec SCSI Card 39320A, check the following items first: Are all SCSI devices powere

11Copyright© 2003 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in an

12This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful inte

Adaptec, Inc.691 South Milpitas BoulevardMilpitas, CA 95035 USARPart Number: 513666-06, Ver. AA JG 08/03© 2003 Adaptec, Inc.All rights reserved. Adapt

1IntroductionThe Adaptec SCSI Card 39320A enables you to connect up to 30 SCSI devices—such as very large arrays of high-performance hard disk drives,

2This installation guide explains how to: Install the Adaptec SCSI Card 39320A Set up SCSI devices Connect SCSI devicesSupport for Older SCSI Devic

32 After you turn off your computer and unplug the power cord, remove the cover from the computer. 3 Locate an unused 64-bit PCI/PCI-X expansion slot

4Warning: Be careful when inserting the Adaptec SCSI Card 39320A in a PCI slot. Some 32-bit slots will not accommodate it, and the card may break if y

5Following are some guidelines for setting SCSI IDs and termination on your devices. Check the SCSI IDsThe Adaptec SCSI Card 39320A and each device yo

6Connecting Internal Ultra320/160 and Ultra2 DevicesA special 68-pin internal LVD cable is needed to connect internal Ultra320/160 or Ultra2 SCSI devi

72 Plug the nonterminated end of the cable(s) to one of the internal LVD/SE connectors.3 Plug the internal Ultra320/160 and Ultra2 SCSI devices to the

8Connecting External SCSI DevicesYou can connect external Ultra320/160 and Ultra2 SCSI devices to the 68-pin external LVD/SE VHDCI SCSI connectors. Ea